Description

For the ideal economical treatment of interior walls and ceilings dry-distemper imparts solid decorative finish to them.

Mixing

To moderate hot water, powder is added gradually under constant stirring until a stiff paste is formed. Allow the pate to stand for about 30 minutes and then thin it to the consistency with water.

Surface Preparation

Surface should be sand papered down and all the other surface defects like cracks holes etc. should be made good with plaster and allowed to dry off before the surface is washed clean & free from Dust and Grease.

Application

It is to be applied evenly with a good distemper brush. During application period distemper should be stirred from time to time. For very absorbent surface a coat of glue size is recommended.

Drying Time

Approximately 6 hr.

Packing

1.5 Kgs. & 20 Kgs.

Covering Capacity

9 to 12 sq. meters per Kg. depending on surface.