Description
SHALIMAX
Plastic Emulsion Paint is new type
surface coating for interior surfaces
of Building such as cement asbestos
cement and hard board etc. It dries
quickly in adour free smooth durable
finish with no brush marks and patches.
It is best suited for colour conditioning
in construction of houses. Painting
Surface can be washed with soap and
water periodically. It has an excellent
alkali resisting property, it adheres
tightly to cement mortar or plaster
surfaces. It hardly changes inn colour
and offers ideal decorative coating
in a light room. It has faint gloss
and provides the coated surfaces with
midtone.
Application
Depending
on porosity of surface and paint can
be thinned with water and applied
by brush. Two coats of paint produces
ideal results.
Surface preparation
Surface
is to be sand prepared down to be
free of grease etc. and also it should
be free of moisture. To prevent patches
and check efflorescence a coat of
plastic primer is advisable.
Drying Time
Within
3 hour. Second coat after another
hour.
Covering Capacity
Approximately
70 to 90 sq. feet per litre.
Packing
20
Litre Buckets.
10 Litre Buckets.
4 Litre Buckets.
1 Litre Box.
Application
Wet
the surface well, allowing the water
to run down. Then apply Shalimax Plastic Emulsion Paint
with a brush of good quality. The
first coat should be so brushed into
the surface that a good bond is formed.
The second or subsequent coats should
follow by brushing or spraying. Application
of first or subsequent coats should
as far as possible be against the
sun’s direction.
Curing
The
surface on which Shalimax Plastic Emulsion Paint is
applied should be wetted at the end
of the day with a fine water spray.
There should be an interval of 6-8
hours for wetting after the application.
Recommended Method of Curing
After
the first coat of Shalimax Plastic Emulsion Paint is
applied curing is recommended in upward
direction especially when dark shades
are applied, so as to avoid any water
marks. This is a very important point
to be noted when application is on
huge deal wells.
Note
: Dark shades generally require
more curing than light shades.
Uses
Shalimax Plastic Emulsion Paint is used for protecting the
decorating various kinds of surfaces
like concrete, Cement/Sand/Lime Concrete
Blocks, Asbestos Cement Sheet, Sand/Lime
Bricks, Wall and Fibre boards, Roughcast
and pebbedust etc.
Precautions
1. Dark shades are liable to fleet
and are usually for interior painting.
2. Shalimax Plastic Emulsion Paint is not recommended
for external application to ordinary
bricks unless the bricks are dry and
the structure is such that it provides
maximum protection from the moisture
penetration.
Covering Capacity
This
depends on porosity and texture of
the surface and whether applied by
brush or spray. When applied with
all necessary precautions and as per
specification, the coverage of Shalimax Plastic Emulsion Paint for 2 coat brush-work applied
on different kinds of surfaces is
as under: -
|
